Change the name of the Wi-Fi internet network of the Canon MG6820 Printer — Here’s How

  • Share this:
Change the name of the Wi-Fi internet network of the Canon MG6820 Printer — Here’s How

Here, some basic information is given on how to connect the Wi-Fi, how to change the Wi-Fi name etc. All the information is given in detail in the coming section. You might not know, but there are also some advantages of connecting printers over Wi-Fi. You can print anywhere in the house, and you will be able to use the same printer on multiple computers or smartphones etc. If you face any problem, then you can contact the printer repair agency. 

How to Connect the Canon with Wi-Fi?

There is a simple way to connect the printer with the wireless router. And, the steps given here will guide you. To your information, if you connect a device via a wireless router, and then you select the direct connection mode to connect it to the printer, the router will automatically be disabled. Thus, it will change to the mobile data connection.

The first thing that you need to do is to press the Home button. If you see that an error screen shows up, then just click OK and then press the Home button again. After that, you need to click on the LAN settings and choose the Wireless LAN Setup option followed by the Cableless Setup option. In the end, you have to press the OK button to proceed with the change. But, you fail to do so, then seek suggestions from Printer repair Dubai.

What is the Process to change the Wi-Fi Internet Network name on Canon mg6820 Printers?

In order to change the Wi-Fi internet network name, you need to activate the Wireless LAN Settings to Change The Settings In Wireless LAN. For the activation, you need to connect the printer to the computer with a USB cable. The steps are given below:

First, you need to start up the IJ network tool. Now, select the Printer With A USB Cable and click on the Configuration button, followed by the Wireless LAN button. After changing the configuration, click on the OK button. 

A configuration screen will display on your screen before the Settings are sent to the printer. After you click on the OK button, the Settings will be sent to the printer, and the transmitted settings screen will be displayed. You can also contact the printer repair experts if you face any difficulties. 

What are the problems faced by the users with the Wireless Printer?

Now, let us discuss the certain problems with the wireless printer. All devices do have flaws, and they are not perfect. It might be possible that the printer is not connecting with the router even when they are in the same room. These are some common problems, and it is quite frustrating for the users. There are some ways to fix the problem and the tired and tested solutions are given below:

1. Use a cable to connect to the printer

If you are facing a problem connecting to the printer, then you can use a cable to get rid of the problem. Sometimes, you might face a problem with the Wi-Fi signal. So, try using a USB cable. 

2. Find a place for your printer

You need to find a proper spot where you can place your printer; so that it can get easily connected with the router. Often it has been seen that the distance between the printer and router is creating a problem. So, find a place where the Wi-Fi signal can deliver the data properly. You are advised not to place the printer inside a closet or under the desk. 

3. You need to reboot the printer

Most of the problem is solved with these fixes. You just need to reboot the printer. Unplug all the cables connected with the device, then wait for a few minutes and finally plug it back in. 

4. Need to update the firmware 

You need to update your device; so that you can avoid bugs and other issues. It has been seen that in most cases, updating the device can make a lot of difference. 

5. Reset the printer 

Resetting the printer comes as the last fix. If all the above fixes fail, then try resetting one. These last fixes will solve your problem. In case your printer has a liquid display, then the command will be in the printer's setting menu. For the HP model, power down the printer and, for 30 seconds, unplug all the cables. Then, after a few minutes, reset it, and you will get rid of the problem. 


So, this was how to change the Wi-Fi network name of the printer. Also, an expert suggestion is given in case you face any problems and also their fixes are mentioned above. This will help you a lot to have a better idea about the Canon MG6820. Follow the steps accordingly, and you will be able to change the name properly. If you are not confident enough, then you can contact any trustable and authorised printer repair center.  

Guest Contributor

Guest Contributor